Bruno Scooter Lifts and Wheelchair Lifts

Bruno Scooter Lift

Model VSL-6000

This easy to use product lifts and stores your unoccupied scooter or powerchair inside your vehicle at the touch of a button. Simply connect the docking device, push a button on the hand-held pendant, and let your Curb-Sider do the heavy lifting for you!

Highlights:

• Fully Powered - Makes lifting and storing your scooter or powerchair inside your vehicle virtually effortless (400 lbs/181 kg lifting capacity)
• Offset Arm Design - Allows lifting/lowering behind, at the rear corner of, or on the side of the vehicle (near the rear wheel)
• Fold-down Lift Head allows partial third row seating access (where applicable) or cargo space and improved driver visibility when mobility device is not present (requires optional quick release pins)
• Docking device for your mobility device is included at no charge
• Available for passenger or driver side of vehicle
• Safe/Reliable - lifecycle and strength tested beyond industry standards
• No structural modifications to your vehicle - can be easily removed for vehicle resale
• Can reinstall in your next vehicle
• Works with minivans, SUVs, CUVs, pickup trucks and full-size vans (call to confirm compatibility)
• Hundreds of custom, vehicle-specific mounting kits are available for an extra clean and precise installation

View Bruno VSL-600 Brochure

Bruno Scooter Lift

Model ASL-250

This easy to use product lifts and stores your unoccupied scooter or powerchair outside your vehicle at the touch of a button. Simply roll your mobility device on the platform from either side, hit a button, and let the Meridian do the lifting for you. Scooters and powerchairs are automatically secured when lift is raised. Retractable belts are also available for securement.

Highlights:

• Fully Powered - Makes lifting and storing your scooter or powerchair outside your vehicle virtually effortless - one button operation
• 350 lbs/160 kg lifting capacity
• Safe/Reliable - Independently tested for rough road conditions, 100,000 mile life, and environmental operating extremes.
• Drive on/off either side of platform - no reversing necessary
• Platform automatically folds up when not in use
• Automatically secures scooters and powerchairs when lift is raised
• Retractable belts are also available for securement
• Optional Swing-Away available to access rear vehicle hatch
• No structural modifications to your vehicle - mounts to your vehicle's class II or class III hitch receiver (not included)
• Can reinstall on your next vehicle

View Bruno asl-250 Out-Sider® Meridian Brochure

Bruno Scooter Lift

Joey™ Vehicle Lift Model VSL-4000HW

This simple to use product lifts and stores your unoccupied scooter or powerchair inside your minivan at the touch of a button. Simply roll your mobility device on the platform from either side, hit a button, and let the Joey lift and store your mobility device for you. Securement belts are included for safety during transport.

Highlights:

• Fully Powered - Makes lifting and storing your scooter or powerchair inside your minivan virtually effortless - one button operation
• 350 lb/160 kg lifting capacity
• Safe/Reliable - Lifecycle tested beyond industry standards
• Drive on/off either side of platform - no reversing necessary
• Includes securement straps for safety
• No structural modifications to your vehicle - can be easily removed for vehicle resale
• Can reinstall in your next vehicle
• Many custom, vehicle specific mounting kits are available for an extra clean and precise installation

View Joey™ Vehicle Lift Model VSL-4000HW Brochure

Bruno

Model ASL-225 Out-Sider

• The lightest-weight exterior vehicle lift designed to handle today’s popular travel scooters!
• Lowest-profile design minimizes rear vision obstruction.
• Industry-leading 145 lb./65.9 kg. lifting capacity.
• The gas-spring assist provides easy “fold/unfold” of the lift platform. The safety latch prevents unintentional lowering of the lift platform.
• Exclusive “lift mast angle adjustment” allows the installer to nest the Out-Sider Micro tight against the rear of the vehicle.
• Can be powered by the vehicle's battery or powered with the optional Bruno Pow'rPac.
• Road and laboratory tested by a certified testing facility.
• Bruno’s R3 Lift Belt/motor combination provides “whisper quiet” operation and maximum reliability and durability.
• Convenient control arm lets you operate the lift from a safe distance.
• An ultra-strength strap system is used to secure the scooter to the platform. It’s easy to use and can be operated with one hand!

Bruno

Model ASL-325 Space-Saver™ Vehicle Lift

• The Bruno Space-Saver Vehicle Lift, Model ASL-325, is an exceptionally versatile take-apart lift designed to help store your scooter in vehicles with smaller trunks. The Space-Saver solves the problem of storing a scooter in smaller vehicles with limited t
• The Space-Saver is designed to fit closer to the interior trunk wall, providing a ‘tighter arc’ when manually swinging the scooter in/out of the trunk. This allows scooters to be stored in spaces that won’t work with more conventional lif
• The Space-Saver is fully adjustable for height and length and raises scooters weighing up to 200 lbs./91 kgs. The Space-Saver is lightweight and assembly/disassembly can be completed in three simple steps, quickly and easily.
• Can be powered by the vehicle's battery or powered with the optional Bruno Pow'rPac.
• The Space-Saver can be stored anywhere - in the trunk or inside the vehicle itself. And when an additional tower base installation kit is ordered, the Space-Saver can be used in more than one vehicle.

View Model ASL-325 Space-Saver™ Vehicle Lift Brochure

Bruno

Model ASL-350 Offset Space-Saver™ Vehicle Lift

• Gives you the flexibility to load a partially-assembled scooter into the trunk of today’s smaller cars or those cars with ‘sloped-in’ trunk designs. This Lift features an offset outer arm allowing you to more easily position your scooter
• Ideal for vehicles with trunks that previously were considered too small for lift installations. Now you don’t have to go without the benefit of a lift any longer and there’s no need to consider the costly purchase of a different type of car.
• Designed with a low-profile, outer arm to make storing your scooter even easier. All controls are located conveniently on top of the lift arm. Just press a button and eliminate the struggle of raising and lowering your scooter!
• Can be powered by the vehicle's battery or powered with the optional Bruno Pow'rPac.
• Can be stored anywhere, in the trunk or inside the vehicle. It disassembles quickly and easily, requiring only three steps. When an additional tower base assembly is ordered, it can even be used in more than one vehicle.
• Raises and stores many types of three- or four-wheel scooters weighing up to 200 lb.

View Model ASL-350 Offset Space-Saver™ Vehicle Lift Brochure

Bruno

Scooter Lift Vehicle Lift Model ASL-400

• Power Raise/Lower and Manual Rotate Operation - Makes lifting and storing your scooter inside your vehicle virtually effortless (200 lb/90 kg lifting capacity)
• Lift folds down when not in use
• Easy, one button operation
• Docking device for your mobility device is included at no charge
• Safe/Reliable - lifecycle and strength tested beyond industry standards
• No structural modifications to your vehicle - can be easily removed for vehicle resale
• Can reinstall in your next vehicle
• Hundreds of custom, vehicle-specific mounting kits are available for an extra clean and precise installation
• Sales, installation and service provided by our factory-trained worldwide network of dealers

View Scooter Lift Vehicle Lift Model ASL-400 Brochure

Bruno® Scooter Lifts

Model AWL-1600 Back-Saver™ Vehicle Lift

• Simple to operate and does not require any manual lifting. Just fold up the wheelchair and roll it onto the platform. Turn the key to the ON position and depress the rocker switch to the UP position. Unloading the wheelchair is just as simple and trouble-f
• Rated to handle most folding wheelchairs, with 22'' or larger rear wheels, and features a 100 lb./45 kg. weight capacity.
• Fits a standard Class I hitch tongue or a Class II/III if an adapter is used. It also features a strong, tubular frame for structural rigidity and maximum durability.
• Features a self-locking, hold-tite bar that’s designed to grip the chair firmly during transport, without marring its finish.
• Meets state and federal D.O.T. regulations for license plate illumination and visibility. It also includes an extra brake light for security and peace of mind.
• Optional Pow'rPac power supply adds convenience for installation and operation.

View Model AWL-1600 Back-Saver™ Vehicle Lift Brochure

Bruno Turning Seat

Stow-Away Model TAS-1850

This innovative addition to Bruno's TAS line of products was designed specifically for pickup trucks and higher SUVs. Mounted under the vehicle in a sealed and protected container, the Stow-Away is a power transfer seat that stops at the perfect height for transferring. Once on, the seat raises you to the optimal height for getting into the vehicle.

Highlights

• Makes entering and exiting your pickup truck or higher SUV easy
• User weight capacity of 300 lb/136 kg
• Discretely
• Preserves factory seat and all of its functions (recline, fore/aft, heat/cool, etc.)
• The vehicle interior is not affected one bit! Keeps all your seats and space!
• Single switch, one-button operation
• Safe - does not affect Federal Motor Vehicle Safety Standards
• No structural modifications to your vehicle - will not affect resale
• Can reinstall on your next vehicle
• Can be stopped at any point for ideal transfer height

View Stow-Away Brochure